WESTERN MECHANICAL, INC. | Primary Dispatch: (661) 251-0111 | Toll-Free 24/7: (800) 585-5085 | CSLB #618138 (C-20 HVAC) | 100% UA Local 250 Union Trained
Microprocessor Retrofits
Specification: BACnet / Modbus Open Protocol
Replacing legacy pneumatic controls with high-speed direct digital automation and remote facility telemetry.
Direct Engineering Summary: Microprocessor Retrofits
Aging chillers, boilers, and custom air handlers frequently remain mechanically sound in their heavy steel shells and copper heat exchangers long after obsolete OEM pneumatic controls or discontinued 1990s/2000s circuit boards fail. Western Mechanical, Inc. (CSLB #618138, UA Local 250) executes non-proprietary microprocessor and DDC controller retrofits across Southern California—replacing failed pneumatic tubing and legacy boards with open BACnet/Modbus PLCs at a fraction of full equipment replacement cost: (661) 251-0111.
Technical Specifications & Engineering Benchmarks
Benchmark Parameter
Engineering Specification
Discipline Classification
SPECIALTY • CSLB #618138 (C-20 HVAC)
Engineering Specification
BACnet / Modbus Open Protocol
Supported OEM Platforms
Johnson Controls (Metasys), Automated Logic, Honeywell, Distech Controls, Trane Tracer
Service Labor Standard
100% UA Local 250 Union Trained • 0.78 EMR
Emergency Dispatch SLA
< 2 Hours 24/7 Across Southern California • (661) 251-0111
Regulatory Standards
Title 24 Part 6, SCAQMD Rule 1146, HCAI / OSHPD PIN 70
Engineering Scope & Southern California Field Execution
Pneumatic thermostats and mechanical relays drift out of calibration, creating simultaneous heating and cooling battles that skyrocket utility bills. Microprocessor retrofits bring legacy central plants into the modern era with precision digital staging, remote alarms, and automated setpoint resets.
Pneumatic-to-DDC Actuation Conversions & Elimination of Air-Main Compressor Drift
Legacy institutional buildings across Los Angeles, Pasadena, Glendale, and Long Beach still run dry-air pneumatic control mains (15–20 PSIG) feeding leaking diaphragm actuators, oil-fouled PRVs, and drifting bimetallic receiver-controllers. Simultaneous heating and cooling caused by leaking pneumatic three-way valves quietly adds tens of thousands of dollars to annual commercial energy and electric bills.
Western Mechanical decommissions failing control-air compressors, pulls plenum-rated shielded communication cable, installs Belimo fail-safe spring-return electronic actuators and 10K Type II/PT1000 thermistors, and commissions open Distech, Honeywell, or Tridium BACnet controllers with trend-logged setpoint verification.
Chiller & Rooftop Unit Microprocessor Upgrades Without Proprietary OEM Lock-In
When a legacy Carrier, Trane, McQuay, or York chiller panel suffers dark LCD displays, corrupted EPROM memory, or unobtainable expansion-valve driver cards, OEM sales reps often push an emergency six-figure full-machine replacement with a 24-week factory lead time.
Our controls and refrigeration specialists retrofit modern industrial chiller/boiler microprocessors with solid-state pressure transducers, superheat EXV PID loops, phase-reversal protection, and open BACnet/IP read/write integration—extending reliable central plant asset life by 10 to 15 years.
UA Local 250 Field Protocol & Certified Best Practices
Direct digital controller (DDC) replacement of obsolete pneumatic linkages
High-accuracy thermistors and pressure transducers installation
Remote cloud telemetry with SMS and email equipment fault alarms
Optimal start/stop scheduling based on ambient weather forecasts
What is the biggest problem with aging pneumatic HVAC controls?
Pneumatic air lines develop pinhole leaks, compressor dryers fail, and copper restrictors clog. This causes dampers and valves to stick open, forcing chillers and boilers to fight each other simultaneously.
Can our central plant be modernized without replacing the heavy machinery itself?
Absolutely. A microprocessor retrofit keeps your existing chillers, boilers, and pumps intact while replacing only the sensors, actuators, and controllers, modernizing your facility at 10% to 20% the cost of replacement.
Do you offer remote equipment monitoring and alarm notifications?
Yes. Our digital control packages include secure cloud gateways that immediately send SMS and email alerts to facility directors and Western Mechanical technicians when operating limits are exceeded.
Western Mechanical, Inc. (Founded 1991) • 2210 Soledad Canyon Road, Suite O, Acton, CA 93510 • Primary Office: (661) 251-0111 • 24/7 Toll-Free Emergency Dispatch: (800) 585-5085 • CSLB #618138 (C-20 HVAC) | 100% UA Local 250 Union Trained.