WESTERN MECHANICAL, INC. | Primary Dispatch: (661) 251-0111 | Toll-Free 24/7: (800) 585-5085 | CSLB #618138 (C-20 HVAC) | 100% UA Local 250 Union Trained
Cooling Towers
Specification: Crossflow & Counterflow Towers
Tower fill replacement, basin cleaning, variable-speed fan drive retrofits, and drift eliminator service.
Direct Engineering Summary: Cooling Towers
Open-circuit crossflow and closed-circuit evaporative fluid coolers reject central plant heat into dusty, high-mineral Southern California air—creating severe scale, corrosion, biological biofilm, and mechanical drivetrain wear. Western Mechanical, Inc. (CSLB #618138, UA Local 250) overhauls Baltimore Aircoil (BAC), SPX Marley, Evapco, and Reymsa cooling towers, executing PVC fill replacement, right-angle gearbox/shaft rebuilds, basin sanitization, and ASHRAE 188 compliance across SoCal: (661) 251-0111.
Technical Specifications & Engineering Benchmarks
Benchmark Parameter
Engineering Specification
Discipline Classification
SPECIALTY • CSLB #618138 (C-20 HVAC)
Engineering Specification
Crossflow & Counterflow Towers
Supported OEM Platforms
Baltimore Aircoil Company (BAC), Marley (SPX), Evapco, Tower Tech
Service Labor Standard
100% UA Local 250 Union Trained • 0.78 EMR
Emergency Dispatch SLA
< 2 Hours 24/7 Across Southern California • (661) 251-0111
Regulatory Standards
Title 24 Part 6, SCAQMD Rule 1146, HCAI / OSHPD PIN 70
Engineering Scope & Southern California Field Execution
Cooling towers are the thermal heat rejection heart of any water-cooled central plant. Keeping towers free of biological growth, mineral deposits, and fan vibration guarantees the lowest possible condenser water temperatures, directly reducing chiller compressor power draw.
Heat-Transfer PVC Fill Replacement, Drift Eliminators & Wet-Bulb Approach Recovery
Hard municipal makeup water across Los Angeles, Orange County, and the Inland Empire precipitates calcium carbonate and silica scale across thermoformed PVC fill sheets—choking airflow static pressure, channeling water unevenly, and degrading tower approach from a design 7°F above ambient wet-bulb to 14°F+. That lost 7°F forces water-cooled chillers to consume 12% to 15% extra electrical power every hour.
Western Mechanical rigs out calcified fill packs, installs OEM-matched BAC/Marley flame-retardant PVC or high-temp CPVC fill media and triple-pass cellular drift eliminators (<0.0005% circulating GPM drift), clears pressurized spray nozzles or gravity hot-water distribution basins, and hydro-flushes sump strainers.
Operating in 100% relative humidity airstreams subjects fan pillow-block bearings, right-angle spiral-bevel gearboxes, cast-aluminum fan hubs, and carbon-steel motor bases to relentless galvanic corrosion and thrust wear. If a mechanical float switch or vibration cutout switch is bypassed or seized, a thrown fan blade can shred upper tower casing.
Our union millwrights and pipefitters laser-align Amarillo/Marley gear reducers and hollow carbon-fiber driveshafts, pitch multi-blade FRP axial fans with digital inclinometers to equalize motor amp draw across multi-cell banks, extend external grease & oil-sight lines outside the plenum, and live-test Murphy/Metrix vibration safety interlocks.
UA Local 250 Field Protocol & Certified Best Practices
High-pressure chemical basin washing and sediment flushing
PVC cross-flow and counter-flow fill pack descaling or re-packing
Tower fan gearbox oil servicing and laser drive-shaft alignment
VFD fan motor retrofits for dynamic wet-bulb approach control
Frequently Asked Questions: Cooling Towers
How does cooling tower cleanliness affect chiller energy consumption?
Every 1°F drop in condenser water temperature returning from the cooling tower reduces central chiller energy consumption by approximately 1.5% to 2%.
When should cooling tower PVC fill packs be replaced rather than cleaned?
When mineral scale calcifies heavily within the internal flutes or biological growth obstructs more than 30% of airflow channels, re-packing with modern thermoformed PVC fill restores full heat rejection capacity.
Do you align cooling tower drive shafts and overhaul fan gearboxes?
Yes. We provide dual-laser alignment of drive shafts, gearbox seal and bearing replacements, and dynamic on-site fan blade balancing.
Acton Headquarters & 24/7 Cooling Towers Dispatch
Western Mechanical, Inc. (Founded 1991) • 2210 Soledad Canyon Road, Suite O, Acton, CA 93510 • Primary Office: (661) 251-0111 • 24/7 Toll-Free Emergency Dispatch: (800) 585-5085 • CSLB #618138 (C-20 HVAC) | 100% UA Local 250 Union Trained.